Rock Bolts – Solid Bar | DYWIDAG | DEPO MATERIAL PUSAT BAHAN BANGUNAN
Untuk permintaan brosur, info produk Rock Bolts – Solid Bar | DYWIDAG, ataupun penawaran produk Rock Bolts – Solid Bar | DYWIDAG hubungi kontak kami
Rock Bolts – Solid Bar | DYWIDAG
|
Product Code Guide
|
Bolt Type
|
Dia.
|
Length
|
Drive Nut & Accessories
|
Coating
|
Packaging
|
AH
|
4
|
150
|
Z3R
|
G
|
351E
|
Physical Properties
|
Minimum
|
Typical
|
Yield Strength
|
375MPa / 140kN
|
400MPa / 115kN
|
Tensile Strength
|
570MPa / 210kN
|
680MPa / 250kN
|
Calculated Shear Strength
|
140kN
|
170kN
|
Elongation (After Fracture)
|
17%
|
22%
|
Mass Per Metre
|
2.92kg
|
Bar Core Diameter
|
21.7mm
|
Major Bar Diameter
|
23.2mm
|
Cross Sectional Area
|
370mm²
|
Rolled Thread
|
M24x3.0mm Pitch
|
- Manufactured from a special hot rolled deformed bar designed by DSI.
- This bolt features a rib pattern which actively assists with mixing the chemical anchors during installation.
- The deformed bar rib pattern improves load transfer properties.
- The rolled thread strength nominally equals the column strength of the bar.
- The 24mm chemical anchor bolt is designed to be used with chemical anchors, but can be effectively used with cementitious grouts.
- Corrosion protection may be provided by hot dip galvanizing or alternative coatings.
- Australian Patent Number 536627 is applicable to the bar design of this bolt.
Standard Lengths & Packaging
Standard bolt lengths range from 600 to 3000mm in 300mm increments.
Non-standard requirements are available by negotiation.
Bolts are packaged in bundles with threads protected by heavy duty polyethylene bags.
Bolt fittings, such as nuts, anti-friction washers and domed balls, are supplied fitted to rock bolts in the configuration requested.
Installation Guide Lines
- 27-28mm hole diameters are preferred. If larger diameter holes are to be used refer to "Posimix" bolt on data sheet WS.
- Hole depth is critical. Hole depth should be shorter than the bolt to allow for the height of the washer and nut.
- It is important to follow the resin anchor recommended mixing and hold times as printed on the chemical anchor cartons.
- DO NOT OVER MIX.
Notes
- DSI ning Products Division is Quality Assured to ISO 9001:2008, Registration No.QAC/R61/0315Mi.
| DYWIDAG-SYSTEMS INTERNATIONAL
Phone: +62 3191636705 Mobile: +62 81230070041
Email: info@depo.co.id |
Note :
All dimensions, weights, quantities and specifications are those applicable at the time of publication and may be amended from time to time.
| Product Accessories Examples |
| Product Group | Starplates | Dome Plates | Dragonfly | W-Strap |
|
 |
| Product Code Prefix | STP | D | DF3 | MW |
|
DEPO MATERIAL
Office :
Jl. Ratu Ayu Griya Wage Asri Block A/9 Taman Sidoarjo Jawa Timur
Phone. 031 85589116 - 0812 3007 0041 - 085790960888
Email. info@depo.co.id | materialdepo@gmail.com
SIDOARJO
Griya Wage Asri Blok.A/9;
Sidoarjo Jawa Timur
Phone : (031)85589116 - 0812 3007 0041
info@depo.co.id
|
JAKARTA
JL. Pagelaran KPG Cedang;Cipayung Jakarta Timur138107
Phone.0822 2068 9997
info@depo.co.id
|
BANJARMASIN
JL. A.Yani KM3 B1 Banjarmasin Kalimantan Selatan
Phone : 0813 5181 2715
info@depo.co.id
|
|